- Woodworker 2 circular all purpose blade saw blade
- Used for rip and crosscut 1 to 2 inch hardwood and softwood resulting in a smooth as sanded surface
- 20 Degree face hook, ply-veneers will crosscut with no bottom splinter at moderate feed rate
- This 40 tooth saw blade measures 16 inches in size, kerf measures 11/64 inches in size
- Recommended for thin, low pressure, 2-sided laminates, plywood and fine cross cutting on all woods
- Woodworker 2 circular all purpose blade saw blade
- Used for rip and crosscut 1-Inch to 2-Inch hardwood and softwood resulting in a smooth as sanded surface

상품 상세 정보

Size:D 16 | T 40 | K 11/64 | A 1 | TS ATB

From the Manufacturer


Forrest's blades offer a superior cut that leaves a rip-cut saw edge that is as smooth as if it had been sanded, and a cross-cut edge that is almost mark-free. The blades run very quietly, and backside tearout in plywood is negligible. Each blade is virtually hand-made. The plate is hand-tensioned (up to 15 minutes per blade), superior C-4 carbide teeth are hand-brazed to the plate, and the blade is straightened and restraightened multiple times throughout the process. Think of a Forrest blade as a tool in your shop, not an accessory. Forrest stands behind it's blades by offering a sharpening service that bring blades back to the exact tolerances offered in a new blade. And this same exacting service is available for other manufacturer's blades as well, so they should come back better than new. The NO-MELT carbide-tipped saw blade is especially designed for cutting single or multiple stacked sheets of plastic without chipping or melting these materials. NO-MELT blades are particularly suitable for acrylics, delrins, ABS (Coycolac), styrenes, PVC, and both high and low melt nylons. Specially engineered side clearances on the carbide teeth significantly reduced and in many cases, totally eliminate any formation of melted burrs of buildup of residue on cross-sawn sections of plastic materials. Made with DOUBLE-HARD and 40% stronger #C4 Carbide. 50% to 300% Longer Life Between Sharpenings, Reduced Yearly Sharpening Costs, Less Machine Downtime, Improved Labor Efficiency, Inventory Savings -- Fewer Blades Required.




ASIN : B000OMQ01C


PROD번호 : 690253265
정보업데이트 : CV.39680 : 2020-10-20 오후 5:37:52